Micronegatrone pressure converter based on a silicon MOS structure

  • A. M. Gasanov National Aerospace Agency, Baku, Azerbaijan
  • F. D. Kasimov National Aerospace Agency, Baku, Azerbaijan
  • A. E. Lutfalibekova National Aerospace Agency, Baku, Azerbaijan
Keywords: negatron, MOS structure, local pressure, elastic mechanical stresses, band gap width

Abstract

The influence of local anisotropic pressure on a silicon MOS structure has been investigated. It is shown that the increase in inversion capacitance is associated not only with the growth of positive carriers in the oxide at the Si–SiO interface under the influence of local pressure, but also with the reduction of the semiconductor band gap width. A negatron circuit is proposed that converts pressure into frequency.

Published
2004-10-30
How to Cite
Gasanov, A. M., Kasimov, F. D., & Lutfalibekova, A. E. (2004). Micronegatrone pressure converter based on a silicon MOS structure. Technology and Design in Electronic Equipment, (5), 29-31. Retrieved from https://www.tkea.com.ua/index.php/journal/article/view/TKEA2004.5.29