Application of ferrite-garnet epitaxial structures in ultra-high-frequency electronics

  • S. I. Yushchuk Lviv Polytechnic National University, Ukraine
  • S. A. Yuryev Lviv Polytechnic National University, Ukraine
  • P. S. Kostyuk Lviv Polytechnic National University, Ukraine
  • V. I. Bondar Lviv Polytechnic National University, Ukraine
Keywords: ferro-garnet epitaxial structures, resonators, microwave, magnetostatic waves, etching methods

Abstract

Single-crystal iron-yttrium garnet (IYG) films with thicknesses ranging from a few micrometers to 92 μm were grown using the liquid-phase epitaxy method. Three methods of etching FeYG films were used to fabricate devices based on magnetostatic waves: ion etching, liquid-chemical etching, and laser-induced etching. The developed waveguide structures and resonators were used to create planar microwave filters and delay lines.

Published
2005-06-30
How to Cite
Yushchuk, S. I., Yuryev, S. A., Kostyuk, P. S., & Bondar, V. I. (2005). Application of ferrite-garnet epitaxial structures in ultra-high-frequency electronics. Technology and Design in Electronic Equipment, (3), 22-25. Retrieved from https://www.tkea.com.ua/index.php/journal/article/view/TKEA2005.3.22
Issue
No. 3 (2005): Tekhnologiya i konstruirovanie v elektronnoi apparature
Section
Articles

Copyright (c) 2005 Yushchuk S. I., Yuryev S. A., Kostyuk P. S., Bondar V. I.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.