Structure and high-temperature superconductivity of Bi₂Sr₂CaCu₂Oᵧ film

  • M. I. Samoylovich Central Research Technological Institute “Technomash-VOS”, Moscow, Russia
  • A. F. Belyanin Central Research Technological Institute “Technomash-VOS”, Moscow, Russia
  • A. Yu. Ilyushechkin University of Queensland, Brisbane, Australia
Keywords: high-temperature superconductivity, nanostructured films, microstrip resonator

Abstract

Bi–Sr–Ca–Cu–O films exhibiting high-temperature superconductivity were fabricated on MgO{100}, LaAlO₃{100}, Al₂O₃, and Ag substrates using stencil printing and RF magnetron sputtering followed by thermal treatment near the melting temperature. The influence of fabrication parameters on the structure, composition, and superconducting properties of the films was investigated. The functionality of the obtained films at low temperatures and ultrahigh frequencies was demonstrated using fabricated microstrip resonators.

Published
2007-08-30
How to Cite
Samoylovich, M. I., Belyanin, A. F., & Ilyushechkin, A. Y. (2007). Structure and high-temperature superconductivity of Bi₂Sr₂CaCu₂Oᵧ film. Technology and Design in Electronic Equipment, (4), 48-60. Retrieved from https://www.tkea.com.ua/index.php/journal/article/view/TKEA2007.4.48
Issue
No. 4 (2007): Tekhnologiya i konstruirovanie v elektronnoi apparature
Section
Articles

Copyright (c) 2007 Samoylovich M. I., Belyanin A. F., Ilyushechkin A. Yu.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.